Home -> X-10 W800RF32 X10 RF Receiver Our Price $59.99 to $68.99 Product Variation 32 Bit External Antenna (As Shown) $68.99 32 Bit Self Contained (Reduced Range) $59.99 Buy item(s) The W800RF32 family of RF receivers are designed to receive X10 RF signals generated from X10 products: Palm Pad remotes, key chain remotes, Hawkeye motion detectors, and many, many other X10 RF devices. The W800RF32 then sends these commands directly to your computer's serial(RS232)port. This allows your computer to receive X10 RF commands from remotes and motion detectors directly, without having to broadcast any power line commands, thus minimizing power line clutter and improving home automation response times by bypassing the usual power line delay. To use the W800RF32 you will need a dedicated computer (PC or Mac) to interpret the received commands. Software that Supports W800RF32 Indigo (Macintosh) Xtension (Macintosh) HomeSeer (Windows) MisterHouse (Windows / Linux/ Macintosh OS X) Home Control Assistant (Windows) PowerHome (Windows) Housebot (Windows) Doberman Security & Automation (Windows) Girder (Promixis) (Windows) The xPL Project (Windows) ECS (Windows & Linux) Electrical Voltage 7 - 12v DC 120v AC to 9v DC, 60hz wall mounted supply included Controller Current 20 ma Receiver Frequency 310mhz Receiver Range 100 ft line of sight House/Unit Codes and Supported Commands all 256 addresses, basic commands (On, Off, Bright, Dim, All Lights On, All Off), and all extended commands/functions Data Output Format RS-232, 4800 baud, 8 bit, no parity, 1 stop bit. Details on the communication protocol... Connections Power 3.5 mm plug (center +) RS-232 DB9 female DTE pinout TD, RD, & SG Antenna male F connector Mechanical Size 2.5" x 1.7" x 1.0" Weight 2 oz Product Variation 32 Bit External Antenna (As Shown) $68.99 32 Bit Self Contained (Reduced Range) $59.99 Buy item(s)